You're new here! Welcome, please feel free to browse our store.

Multiwii and Megapirate AIO Flight Controller w/FTDI (ATmega 2560)

Multiwii and Megapirate AIO Flight Controller w/FTDI (ATmega 2560)
Our Price: 57.50
Quantity:


Note: Although we cannot give any phone / email support on setting up and using this board, we do provide a full written Instruction manual (in English) All software, drivers required are supplied with every purchase, as well as many instructional PDF's to show you step by step how to use and configure it, so no one will be left in the dark not knowing what to do or how to use it ! . . . .
OTHER RETAILERS JUST SELL YOU THE BOARD ONLY

Multiwii and Megapirate AIO Flight Controller w/FTDI (ATmega 2560)

This board features a multiple serial interface as well as a dedicated I2C interface. You can now plug in a GPS directly, and you still have extra ports for other external devices. In addition to that, the new ATmega 2560 has more IO pins so it can both read the PWM signal from your receiver and it has enough PWM outputs to control the ESCs directly without the need to do the PWM signal in software.

This controller even has a MicroUSB port right on the board, no need to attach an extra FTDI USB interface.



The motion sensing side features a new generation MEMS Gyro, a MPU6050 by InvenSense, which has the MEMS Gyro / Accelerometer sensor on a single chip. There’s also a 3-axis magnetometer and a barometer sensor with a resolution of 0.01 millibar – approximately a 10 cm height difference.


Interested in GPS functionality? Well this is one of the most cost effective ways to get started - simply add a 10Hz GPS module (coming soon) and you’re good to go!




Features:
• Supported MegaPirateNG and MultiWii firmware
• Up to 8-axis motor output
• 8 input channels for standard receiver
• 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry
• 2 servos output for PITCH and ROLL gimbal system
• 1 servo output to trigger a camera button
• 6 Analog output for extend device
• A I2C port for extend sensor or device
• Separate 3.3V and 5V LDO voltage regulator
• ATMega 2560 Microcontroller
• MPU6050 6 axis gyro/accel with Motion Processing Unit
• HMC5883L 3-axis digital magnetometer
• MS5611-01BA01 highprecision altimeter
• FT232RQ USB-UART chip and Micro USB receptacle
• On board logic level converter



Flight mode for Multiwii:
• One of the following basic modes
– Acro
– Level
– Alt Hold
- Heading Lock

• Optional mode
– HeadFree (CareFree)
– GPS Hold (Need GPS receiver)
– GPS Back to home position (Need GPS receiver)



Flight mode for MegaPirate:
• Acro
• Alt Hold
• Loiter (uses GPS)
• Guided (uses GPS)
• Position (uses GPS)
• Circle (uses GPS)
• RTL (uses GPS)
• Auto(uses GPS)
• Follow Me(uses GPS)

Sizes:
Dimension: 50mmX50mm
Height: 11.6mm
Fixing hole spacing: 45mm
Hole diameter: 3mm
Weight: 14.2g

Includes:
1 x AIO PRO FC
3 x 3Pin to 1Pinx3 cable 100mm
1 x 3Pin to 3Pin cable 100mm
1 x Molex 1.25mm 4Pin cable 100mm
1 x Molex 1.25mm 6Pin cable 100mm
1 x Molex 1.25mm 8Pin cable 100mm

 

Product Options

Include Extras:
UBLOX LEA-6H GPS Module (+72.00)

Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!


Review this product...

Related Products:

MWC MultiWii SE Standard Edition 4-axis Flight Control Board QUADX with FTDI Basic Breakout
Our Price: 63.56

Epoxy Protector Case for Rabbit Flight Controller Board
Our Price: 14.99

MultiWii PRO Flight Controller with MTK GPS Module
Our Price: 82.00

Hard Case for MultiWii and MegaPirate AIO Flight Controller
Our Price: 5.99

People who purchased this also purchased...

MultiWii 328P Flight Controller w/FTDI & DSM2 Port
Our Price: 36.99

HK ArduPilot Mega V2.5 Flight Controller USB/GYRO/ACC/MAG/BARO
Our Price: 98.00

Hard Case for MultiWii and MegaPirate AIO Flight Controller
Our Price: 5.99

100mm JR Colour leads Male to Male Extension Leads -26AWG (4pcs/set)
Our Price: 2.99