You're new here! Welcome, please feel free to browse our store.

NEW - KK2.1 Multi-rotor LCD Flight Control Board

NEW - KK2.1 Multi-rotor LCD Flight Control Board
Our Price: 37.99
Quantity:

No Longer Available - SEE V2.1.5

NEW - KK2.1 Multi-rotor LCD Flight Control Board




The next evolution of the rotor revolution is here!! The KK2.1 is packing new found power with updated sensors, memory and header pins.

The next evolution of the rotor revolution is here!! The KK2.1 is packing new found power with updated sensors, memory and header pins.

Designed by the grandfather of the KK revolution, Rolf R Bakke, exclusively for HobbyKing, the KK2.1 is the evolution of the first generation KK flight control boards. The KK2.1 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included with the board for audio warning when activating and deactivating the board.

If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.


Specs
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC1520us

Firmware Version: 1.5:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S

(Custom Mix via the "Mixer Editor" option)

The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.

What is a Multi-Rotor Control board you ask?

The KK2.1 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.

The KK2.1 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).

** Note: An updated software version”1.6” for the KK2.1 is available. It is always recommended to update to the latest software version as part of your initial setup.(this is different than v1.6 for 2.0)

You will require a programmer to do this click here

NOW YOU CAN SEE AGAIN ! 

We now have in stock Replacement LCD screens for those unwelcome heavy landings and accidents


Replacement screen Click Here

PLEASE READ CAREFULLY
These Boards are only suitable for flyers with previous experience or are technically minded . . . ! !
You will be required to do a certain amount of setting up and configuration to enable these boards to function and operate correctly,
you may need to re-flash the board with other firmware than that supplied to allow it to work with your R/C gear or make other adjustments for this board to operate correctly.

Should you not feel confident or have no experience of these types of boards, we first suggest you ask someone who may help you locally, and do some on line research to establish if these boards are beyond your capabilities - Again these board are NOT plug and play -
Please do not purchase if you are not happy with the above statement !

TERMS OF SALE & DISCLAIMER -

By purchasing this item, you are in agreement that Pyramid Models or the owners, cannot give any support, will not be held responsible for any crash damage to this Circuit Board or other connected R/C gear, however caused or even a collision or crash by inexperience pilots, and under no circumstances will a claim for exchange or refund be accepted once used.

This board is an open circuit and should be treated with respect, all Boards are thoroughly checked and tested before dispatch and incorrect wiring or setting up may result in your aircraft becoming unstable and a crash occurring, this may cause serious damage to the controller board, yourself, nearby objects, and any other radio gear connected to this board.

Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!


Review this product...

Related Products:

KK 2.1 HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer
Our Price: 39.95

NEW - KK2.0 Multi-rotor LCD Flight Control Board
Our Price: 36.99