You're new here! Welcome, please feel free to browse our store.

FrSky D8R-XP 2.4Ghz Receiver (with telemetry)

FrSky D8R-XP 2.4Ghz Receiver (with telemetry)
Code FrSky D8R-XP 2.4Ghz Receiver (with AC722
Our Price: £34.99

Select Product Options


FrSky D8R-XP 2.4Ghz Receiver (with telemetry)

This FrSKY ACCST 2.4GHz 'D' series (Two-Way - send and receive) receiver is one of a range of telemetry enabled receivers designed and developed by FrSKY to be compatible with FrSKY 'D' series transmitter modules including the: DFT, DJT, DHT and DHT-U.

The two-way system developed by FrSKY provides not only the normal RC control but also a true telemetry system to return measurements from the model to the transmitter. This new capability allows for data such as altitude, GPS location, battery levels, speed, etc. to be transmitted to a telemetry enabled transmitter where it can be represented on an LCD screen in real time to the operator. Never again will you have to wonder whether or not you have enough voltage to keep flying. Being able to monitor voltage will also help you detect a worn out battery pack before it prematurely ends your flight.

This D8R-XP receiver has a built-in battery voltage sensor and will automatically relay receiver voltage to a telemetry enabled transmitter. It will monitor signal strength and trigger an audible warning of low voltage or poor reception. It has two external analog telemetry ports (A1 & A2) and one G-TX-RX (Ground-Transmit-Receive) digital data-stream port. The RX port is used for connection to FrSKY's sensor hub (FSH-01). This hub is the heart of FrSKY's telemetry system. It is used to collect and process important flight information and performance data from various sensors (sold separately) installed in the aircraft.

This D8R-XP receiver features both RSSI (Received Signal Strength Indicator) and CPPM (Chaotic Pulse Position Modulation) outputs. The RSSI output may be used with on-screen display (OSD) systems that are common in FPV vehicles. The CPPM output may be used for FPV aircraft and multi-rotor applications such as tricopters and quadcopters where it is useful for reducing cabling and wiring problems especially in some flybar-less controllers, autopilot systems and homebrew UAV systems.

* FrSKY’s Advanced Continuous Channel Shifting Technology (ACCST) system giving a highly reliable link, especially in high interference environments.
* Easy to bind and has instant link-up between transmitter and receiver.
* Error-free link, by using 48bits CRC algorithm.
* Excellent reboot times.
* All channels offer failsafe.
* Quick response.
* Very smooth servo movement.
* Built-in battery voltage sensor.
* Two external analog telemetry ports (A1 & A2) and one digital data-stream port (Rx).
* 1 x CPPM output for CH1~8 (enabled when channels 3 and 4 pins are connected by a jumper)
* 1 x RSSI output (Received Signal Strength Indicator)
* Telemetry - Alarm warning on low voltage/poor reception
* Telemetry – RSSI (Received Signal Strength Indicator)
* Failsafe on all channels
* Two switchable servo frame speed modes: FS mode and HS mode (HS for digital servos)
* Low power consumption.
* True two-antenna diversity.
* Firmware upgradable.

* Model: D8R-XP
* Pin configuration: end
* Number of channels: 8
* Modulation: ACCST (Advanced Continuous Channel Shifting Technology)
* Band: 2.4GHz
* Resolution: 11bit (3072)
* Input voltage: 3.5V-10V
* Operating current: 100mA
* Servo frame rate: 18ms for FS Normal Speed Mode, 9ms for HS High Speed Mode
* Antenna length: 145mm (x 2 replaceable)
* Dimensions: 55 x 25 x 14mm
* Weight: 12.4g

* Servos and /or batteries should in no circumstances be plugged directly into the CPPM and RSSI outputs or the external analog and digital telemetry ports (Rx/A1/A2). Doing so will inevitably result in damage to the receiver and also servos over heating and potentially failing.
* To avoid potential damage to servos ensure that FS mode is used for normal speed, standard servos and HS mode only for high-speed, digital servos.

Full instruction are supplied with the D8R-XP. For further information - click here



Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!

Review this product...

Related Products:

FrSky DF 2.4Ghz Combo Pack for JR w/ Module & RX
Our Price: £67.80

FrSky D8R-II PLUS 2.4Ghz 8CH Receiver with Telemetery
Our Price: £29.99

FrSky V8FR-II 2.4Ghz 8CH Receiver (HV)
Our Price: £24.99

FrSky DJT 2.4Ghz Combo Pack for JR w/ Telemetry Module & V8FR-II RX
Our Price: £54.27

FrSky TFR6 7ch 2.4Ghz Receiver FASST Compatible
Our Price: £27.99

FrSky V8R4-II 2.4Ghz 4CH Receiver
Our Price: £23.64

FrSky Delta 8 2.4Ghz 8CH Multi-Brand Receiver D8/V8 Futaba S-FHSS/FHSS Hitec AFHSS Compatible
Our Price: £29.99

FrSky FF-1 2.4Ghz Combo Pack for Futaba w/ Module & Receiver
Our Price: £54.99

FrSky XJT 2.4Ghz Combo Pack for JR w/ Telemetry Module & X8R 8/16Ch S.BUS ACCST Telemetry Receiver
Our Price: £88.50

Turnigy TGY-i10 10ch 2.4GHz Digital Proportional RC System with Telemetry (Mode 2)
Our Price: £169.99

FrSky TFR6-A 7ch 2.4Ghz Receiver FASST Compatible (Horizontal Connectors)
Our Price: £28.99

People who purchased this also purchased...

JR Y Servo Lead 15CM Length
Our Price: £1.50

Special Lacquer with Cellulose Filler 250g
Our Price: £8.75

3M FineLine Masking Tape 1/8th inch x 36 yards Roll
Our Price: £5.21

3M FineLine Masking Tape 3mm x 55m Roll
Our Price: £9.46

3M FineLine Masking Tape 12mm x 55m Roll
Our Price: £12.99