You're new here! Welcome, please feel free to browse our store.

Tricopter or Quadcopter Control Board V1

Tricopter or Quadcopter Control Board V1
Our Price: 29.95
Quantity:

This board has been updated to Version 2 - Click HERE

Fully Assembled Tricopter and Quadcopter Control-Board

Please NOTE: This board does not come with any leads, just the board




What is a Tricopter and Quadcopter Control board ?

This TriCopter/Quadcopter controller is a flight control board for 3 or 4 Rotor Aircraft (Trocopter / Quadcopters). Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega48PA IC. The Atmega48PA IC unit then processes these signals according the users installed software and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabalises your Quadcopter.

These control boards also use signals from your radio systems receiver (Rx) and passes these signals to the Atmega48PA IC via the ail (aileron), ele (elevator), thr (throttle) and rud (rudder) inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).


Note. . . . . 
this is not supplied in kit form
It is fully assembled and works straight out of the box. Can be used to control the main controls of a TRI-Copter or a QUADcopter by means of the built in Gyros. See SPECIAL NOTE BELOW

Earlier kit versions required the builder to also purchase suitable Gyros, strip out the electronics and re-assemble on the main board, this one has everything done for you, and will maintain stability on any TRI or QUAD copter of your choice !

SEE our Range of Suitable MULTI-COPTERS Click here

Based on the popular and already well supported KKMultiCopter Control board, . . . . . .

This control board uses Japanese Murata piezo gyros that are less sensitive to vibration than SMD type gyros and also features state of the art SMT manufacturing to ensure quality. This board also uses a user programmable Atmega48PA IC.


Specifications

Size: 50.5mm x 50.5mm x 23.5mm
Weight: 14.5 gram
IC: Atmega48PA
Gyro: Murata Piezo
Input Voltage: 3.3-5.5V
Signal from Receiver: 1520us (4 channels)
Signal to ESC: 1520us (4 ESCs)

This control Board will not support more than 4 motors (quadcopter)
for control up to 6 motors see the KKMulticopter Board Here

SPECIAL NOTE

  1. These boards are supplied to control upto 4 motors only, the firmware is what makes it work correctly, so please select the one you want from the above choices,
  2. For a small charge, we can change the firmware to either the Tricopter or Quadcopter version at a later date should you wish to transfer it into another model.
These boards are supplied to control either a Tricopter or a Quadcopter, the main control chip Atmega48PA IC, needs to be programmed for either one, and cannot be used for both set ups, so please select the correct setup from the options at the top of this page for the type of model you want to control

Tricopter - Y configoration = 3 motors
Quadcopter - X Configoration = 4 motors

Quadcopter - + Configoration = 4 motors


PLEASE READ CAREFULLY
These Boards are only suitable for flyers with previous experience or  are technically minded . . . !  !
You will be required to do a certain amount of setting up and configuration to enable these boards to function and operate correctly, 
you may need to re-flash the board with other firmware than that supplied to allow it to work with your R/C gear or make other adjustments for this board to operate correctly.

Should you not feel confident or have no experience of these types of boards, we first suggest you ask someone who may help you locally, and do some on line research to establish if these boards are boyond your capabilites - Again these board are NOT plug and play - 
Please do not purchase if you are not happy with the above statement !

TERMS OF SALE & DISCLAIMER - 
 
By purchasing this item, you are in aggreement that Pyramid Models or the owners, cannot give any support, will not be held 
responsible for any crash damage to this Circuit Board or other connected R/C gear, however caused or even a collision or crash by inexperience pilots, and under no circumstances will a claim for exchange or refund be accepted once used.

This board is an open circuit and should be treated with respect,  all Boards are thouroughly checked and tested before dispatch and incorrect wiring or setting up may result in your aircraft becoming unstable and a crash occurring, this may cause serious damage to the controller board, yourself, nearby objects, and any other radio gear connected to this board.

Product Options

Choose Configuration:
3 Motor Controller Board - TRI-copter
4 Motor Controller Board - X - Quadcopter
4 Motor Controller Board - + - Quadcopter

Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!


Review this product...

Related Products:

This is the ultimate KK MultiCopter Control Board for Tri-copters Quads upto six Motors
Our Price: 19.97

KK2.0 MultiCopter and HK Control Board - Firmware Loader/Programmer
Our Price: 14.99

This Quadcopter frame provides the perfect test bed or starting point for any Quadcopter enthusiast.
Our Price: 29.95

QUADCopter XR100
Our Price: 7.99

This Quadcopter frame provides the perfect test bed or starting point for any Quadcopter enthusiast.
Our Price: 74.95

MWC MultiWii SE Standard Edition 4-axis Flight Control Board QUADX with FTDI Basic Breakout
Our Price: 63.56

HK TALON Quadcopter Frame
Our Price: 47.00

FLYCAM Artist xm-L4500PRO MK2 lightest complete camera mount 170g only
Our Price: 49.95

HJ 450 Quadcopter Kit
Our Price: 34.95

KK MK HK X525 PRO V4 QuadCopter kit RTF & BNF (ready to Fly)
Our Price: 218.00

People who purchased this also purchased...

This Quadcopter frame provides the perfect test bed or starting point for any Quadcopter enthusiast.
Our Price: 29.95

This is the ultimate KK MultiCopter Control Board for Tri-copters Quads upto six Motors
Our Price: 19.97