You're new here! Welcome, please feel free to browse our store.

HK MultiCopter Control Board V2.1




HK MultiCopter Control Board V2.1
Code QUADBoard2
Our Price: 27.99 GBP
Quantity:

Select Product Options

Choose Configuration:
SingleCopter
TwinCopter
Dualcopter
Tri-Copter
Quadcopter (+ Configuration)
X-Copter
Y4-copter
Hexa-copter
SexyCopter (Hexacopter)
Y6 Copter
H6-Copter
X6-Copter
PowerTower
VTOL
AeroPlane
KKPlus Bootloader

Description

NEW V2.1 HK KK Board

Fully assembled Multicopter Control Board for Enthusiastic Builders Controlling up to Six Motors

These are NOT Plug and Play MultiCopter Controller Boards - 
NO EMAIL OR PHONE SUPPORT WILL BE GIVEN !!!!

We do however supply full written instructions and a video to allow you to follow all the setting up procedure - 
PLEASE FOLLOW THEM TO THE LETTER, or you will encounter configeration and setting up problems !

PLEASE READ CAREFULLY
These Boards are only suitable for flyers with previous experience or technically minded . . . !  !
You will be required to do a certain amount of setting up and configuration to enable these boards to function and operate correctly, 
you may need to re-flash the board with other firmware than that supplied to allow it to work with your R/C gear or make other adjustments for this board to operate correctly.

Should you not feel confident or have no experience of these types of boards, or cannot ask someone who may help you locally, we suggest you first do some on line research to establish if these boards are boyond your capabilites - Again these board are NOT plug and play - 

 

Please NOTE: This board is equal in performance to the KK Blackboard V5.5.

please state your choice of Firmware required when making payment - (see pictures below)


Choice of Firmware (installed at time of purchase for FREE)

SingleCopter
TwinCopter
Dualcopter
Tri-Copter
Quadcopter (+ Configuration)
X-Copter
Y4-copter
Hexa-copter
SexyCopter (Hexacopter)
Y6 Copter
H6-Copter
X6-Copter
PowerTower
VTOL
AeroPlane
KKPlus Bootloader

What is a Multicopter and Quadcopter Control board ?

 

This is the latest Multicopter controller board V2 which supersedes the V1 TriCopter/Quadcopter controller V1 was a flight control board for 3 or 4 Rotor Aircraft (Trocopter / Quadcopters) and this NEW V2 will control upto six motors. Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega168PA IC. The Atmega168PA IC unit then processes these signals according the users installed software and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabalises your Quadcopter.

These control boards also use signals from your radio systems receiver (Rx) and passes these signals to the Atmega48PA IC via the ail (aileron), ele (elevator), thr (throttle) and rud (rudder) inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).


Note. . . . . 
 this is not supplied in kit form

It is fully assembled and works straight out of the box, although you will be required to purchase suitable leads that run from your receiver to the board, and these are available as extras/ spares from our on line store. This board can be used to control the main controls of a TRI-Copter / QUADcopter or anything up to six motors by means of the built in Gyros and your choice of Firmware. See 
SPECIAL NOTE BELOW Can be used to control the main controls of a TRI-Copter / QUADcopter or anything upro six motors by means of the built in Gyros. See SPECIAL NOTE BELOW 

Earlier kit versions required the builder to also purchase suitable Gyros, strip out the electronics and re-assemble on the main board, this one has everything done for you, and will maintain stability on any MULTIcopter of your choice !

SEE our Range of Suitable MULTI-COPTERS Click here
 

Based on the popular and already well supported KKMultiCopter Control board, . . . . . . 

This control board uses Japanese Murata piezo gyros that are less sensitive to vibration than SMD type gyros and also features state of the art SMT manufacturing to ensure quality. This board also uses a user programmable Atmega168PA IC.


Specifications

Size: 50.5mm x 50.5mm x 23.5mm
Weight: 14.5 gram
IC: Atmega168PA 
Gyro: Murata Piezo
Input Voltage: 3.3-5.5V
Signal from Receiver: 1520us (4 channels)
Signal to ESC: 1520us (4 ESCs)

This NEW control Board will now support more than 4 motors (quadcopter) 
and will control up to 6 motors or see the KKMulticopter Board Here

SPECIAL RECOMENDATION NOTE

  1. These boards are supplied to control upto 6 motors in various configurations, the firmware is what makes it work correctly, so please select the one you want from the above choices, and see images below.
  2. For a small charge, we can change the firmware to any other configuration at a later date should you wish to transfer it into another model, or use our Multicopter Flash Tool 
  3. Although we do not supply the programmer as standard with this Multicopter Board, (you may already have one) -  Having your own programmer is the best option, 
  4. PLEASE BEWARE - Many People supply Programmers that are not compatible or work at all !
  5. Quite Simply, we don't know what combination of Transmitter, Receiver, ESC's you are using, and for that matter neither did the person who wrote the firmware. 
  6. The Truth of the matter is ? . . . . I have found through experience that with different gear, slightly different results are obtained, so to tweek your Quad, Tri or other Multicopter perfectly, may require using a different version of firmware, it's really trial and error andnot an exact science or  "ONE SETTING FITS ALL"!
These boards are supplied to control the main control chip Atmega168PA IC, and needs to be programmed to work correctly with your chosen configuration,  so please select the correct setup from the options at the top of this page for the type of model you want to control - (please Read above first)


The Tri-Copter diagram below shows the front left motor rotating clockwise, which requires a different prop to normal. . . . . .  this is totally unnecessary, and all the motors turning in the normal anti-clockwise direction using normal rotating props works perfectly !


TERMS OF SALE & DISCLAIMER - 
 
By purchasing this item, you are in aggreement that Pyramid Models or the owners, cannot give any support, will not be held 
responsible for any crash damage to this Circuit Board or other connected R/C gear, however caused or even a collision or crash by inexperience pilots, and under no circumstances will a claim for exchange or refund be accepted once used.

This board is an open circuit and should be treated with respect,  all Boards are thouroughly checked and tested before dispatch and incorrect wiring or setting up may result in your aircraft becoming unstable and a crash occurring, this may cause serious damage to the board, yourself, nearby objects, and any other radio gear connected to this board.

 

 

Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!


Review this product...

Related Products:

This is the ultimate KK MultiCopter Control Board for Tri-copters Quads upto six Motors
Our Price: 19.97 GBP

This Quadcopter frame provides the perfect test bed or starting point for any Quadcopter enthusiast.
Our Price: 29.95 GBP

KK2.0 MultiCopter and HK Control Board - Firmware Loader/Programmer
Our Price: 14.99 GBP

KK MultiCopter Power/ESC Board V2
Our Price: 4.99 GBP

HK TALON Quadcopter Frame
Our Price: 47.00 GBP

HJ 450 Quadcopter Kit
Our Price: 34.95 GBP

KK MK HK X525 PRO V4 QuadCopter kit RTF & BNF (ready to Fly)
Our Price: 218.00 GBP

MWC MultiWii SE Standard Edition 4-axis Flight Control Board QUADX with FTDI Basic Breakout
Our Price: 63.56 GBP