Pyramid Models> Main Page > Radio TX & RX > Full Systems - TX & RX combo > ER9x 9Ch Transmitter with Module & 8ch Receiver (Mode 2) (ER9x Firmware)

You Are Here: Main Page - Radio TX & RX - Full Systems - TX & RX combo - ER9x 9Ch Transmitter with Module & 8ch Receiver (Mode 2) (ER9x Firmware)

ER9x 9Ch Transmitter with Module & 8ch Receiver (Mode 2) (ER9x Firmware)

Our Price: 0

Quantity:

»
»Add to Wish List

Description

NOTE: this item is only available to UK Customers

9Ch Transmitter with Module & 8ch Receiver (Mode 2)
(Pre-Flashed with 1 of 5 ER9X Firmwares - see below)

Item	No Heli or Templates	More Information

ER9x	ER9x-NOHT	Standard versions for your 9x radio
ER9x-FRSKY	ER9x-FRSKY-NOHT	If your board has been modified to use the FRSky Telemetry or with the FrSky Telemetry plug in Module
ER9x-JETI	ER9x-JETI-NOHT	For the JETI telemetry system
ER9x-ARDUPILOT	ER9x-ARDUPILOT-NOHT
ER9x-NMEA	ER9x-NMEA-NOHT	For NMEA GPS systems

ER9x - Standard Firmware - Select this one if not sure
NOHT - does not show the heli & template menu's (also code not present)
FRSKY - used if you have modified your radio to receive frsky telemetry
JETI - used if you have modified your radio to receive jeti telemetry
NMEA - used if you have modified your radio to receive NMEA gps data
ARDUPILOT - used if you have modified your radio to receive ardupilot data

In the following example:
ER9x-FRSKY-NOHT

Would mean. ER9X, with FRSKY support, No Heli & Template menu

In case you dont know - CLICK HERE - for full details of the ER9x Firmware

A Very reliable 2.4Ghz system suitable for beginners and pro pilots alike.

With the ER9x firmware Pre-installed your radio will be easiest to program of all the 9x and clones Available ( Turnigy / Imax / Eurgle / FlySky ) and have up to 16 model memory at your disposal instead of only 8, plus inbuilt 2.4Ghz (no daggy second antenna) this is a quality, reliable 2.4Ghz system suitable for beginners and pro pilots alike.

Get that locked-in feeling that only 2.4Ghz glitch free technology can provide.

Ultra fast reaction times and interference free control of your model is only achievable with this 2.4Ghz technology.

Without a doubt, the best value 9Ch system available!

Note:
Only the RX-9X8Cv2 receivers are compatible with TX-9X transmitter modules, Other TX modules are available from our shop that allow the use of other receivers, such as FRSky and Orange

UPGRADE AVALABLE

You can Upgrade to FrSky (not to be confused with FlySky !)
for a Superior quality System - Full details here

PLEASE NOTE some TURNIGY 9x Transmitters (and all currently manufactured) will require some trimming down of the back cover to allow the module to fit inside the TX module compartment.

Number of Channnel: 8ch ppm/9ch pcm

Display: 128*64LCD
Support Type: Heli/Acro/Glid
Model Memory: 16
Stick model: 4
Encoder type: ppm/pcm
Subtrim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Show: Yes

Required:

Battery

Included:

Turnigy 9x 9Ch Transmitter - with ER9x Firmware
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver

Instruction Manuals - (Downloadable PDF only)

Important.
This 9X will have the ER9x firmware pre-installed, fixing previous menu and

mixing issues and many added features. This ER9x firmware flash is only available for the 9X system as we flash each unit in our office before it is shipped.

We do not solder any wires to the main board or add anything such as flashing sockets

Purchases of any other rebranded version of the 9X sold elseware will not have the ER9x firmware pre-installed, we do not charge for this firmware, just the time for us to install it on your behalf - ER9x is licenced under the GNU v2.0 License, software source is here

(even the OEM factory does not have these updates installed).

For just a further £20 - Upgrade to a

Backlight display , Available in Blue, Green or White - We will fit this new backlight display into your transmitter before dispatch, if you buy one at the same time as purchasing this item (select option above), or buy the DIY kit by clicking Here

er9x is free to use under the GNU v2.0 License. Feel free to use, copy and modify it as you wish!

Product Options

Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!

Review this product...