WARNING - These are NOT Plug and Play MultiCopter Controller Boards - 

NO EMAIL OR PHONE SUPPORT WILL BE GIVEN !!!!

We do however supply full written instructions, all the software and video's to allow you to follow all the setting up procedure, so you won't be left in the dark how to set up and use this great board - PLEASE FOLLOW THEM TO THE LETTER, or you may encounter configuration and setting up problems !

PLEASE READ CAREFULLY

These Boards are only suitable for flyers with previous experience or technically minded . . . !  !

You will be required to do a certain amount of setting up and configuration to enable these boards to function and operate correctly, 

you may need to re-flash the board with other firmware than that supplied to allow it to work with your R/C gear or make other adjustments for this board to operate correctly.

Should you not feel confident or have no experience of these types of boards, or can can ask someone who may help you locally, we suggest you first do some on line research to establish if these boards are boyond your capabilites - Again these board are NOT plug and play - 

Please do not purchase if you are not happy with the above statement !

The MultiWii PRO is a gyro/accelerometer based flight controller that is loaded with features. This version of the MultiWii supports direct connection of a GPS module (package includes MTK 3329 GPS module) allowing for ultra-precise positioning functionality. With expandability options and full programmability, this device can control just about any type of aircraft. This is the ideal flight controller for your multi-rotor aircraft.

We also have cases available here . . . or make selection above when ordering

Features:
(MultiWii PRO)
• SMD component design with Atmega2560
• ITG3205 Triple Axis Gyro
• BMA180 Accelerometer
• BMP085 Barometer
• HMC5883L Magnetometer
• Servo output for camera pitch and roll control
• Supports direct connection of GPS module (MTK 3329 GPS module included)
• On-board USB connection for programming

(MTK 3329 GPS Module)
• Based on MediaTek Single Chip Architecture.
• L1 Frequency, C/A code, 66 channels
• High Sensitivity, Up to -165dBm tracking, providing superior urban performance
• DGPS(WAAS, EGNOS, MSAS) support (optional by firmware)
• USB/UART Interface
• Supports AGPS function (Offline mode: EPO valid up to 14 days)

Specs:
(MultiWii PRO)
Mounting: Standard Mk style mounting holes 45mm X 45mm
Dimensions: 70x50x12mm
Weight: 16g

(MTK 3329 GPS module)
Position Accuracy: < 3m CEP (50%) without SA (horizontal)
Cold Start: under 35 seconds (Typical)
Warm Start: under 34 seconds (Typical)
Hot Start: under 1 second (Typical)
Power Consumption: 48mA @ acquisition, 37mA @ tracking
Shut-down current consumption: 15uA, typical
Dimensions: 30x26x7mm
Weight: 8g

Package content:
MultiWii PRO FC x 1
MTK 3329 GPS Module x 1
GPS module connection leads x 1
Main board connection leads x 1
USB connection cable x 1

More information can be found on the Multiwii Website.
http://www.multiwii.com