Pyramid Models> Main Page > Accessories > R/C Electronics > LMA - Lost Model Alarm/Finder

You Are Here: Main Page - Accessories - R/C Electronics - LMA - Lost Model Alarm/Finder - Dual Function

LMA - Lost Model Alarm/Finder - Dual Function

Our Price: 0

Quantity:

Standard Price: 0
You Save: 0
% Saved: 0%

»
»Add to Wish List

NEVER LOSE A MODEL AGAIN !

DUAL FUNCTION
R/C Helicopter/Aircraft Lost Model Alarm/Finder

Description

This LMA has a Dual function Audio Module
and Will automatically notify you when you have left the reciever on
or as a Lost Model Alarm - Automatically switches to a different sound

WATCH VIDEO BELOW

3 Automatic modes / sounds

1 - Switch on Mode

Switch on power to receiver = 2 bleeps

2 - RX left on Mode

Leaving RX switched on without TX on = On/off bleeps after 1 minute

3 - Lost model Mode

After a further 1 minute = 1 long bleep followed by 7 quick bleeps

Specification

Size: 4.5 inches long (incl. Leads) x 1/2 inch wide
Weight: 5 gms
Operating Voltage : 4 - 6 volts DC
Low Current consumption : 35 mA (1 mA at standby mode)
Alarm Output Level : 85dB
Can be heard upto 50 meter away
Suitable for all Makes of R/C Systems: 35Mhz / 72Mhz - AM/FM PPM, FM/PCM and only some 2.4Ghz / DSM2 but not DSMX (ask if you need to know)

Features

With this device, you can quickly locate and find your Lost Model Aircraft/Glider or Helicopter easily
The effective Audible range for this Lost Model Alarm can be over 50 Metres
Simple one step activation, (turn off the Transmitter) the Lost Model Alarm/Tracker will start to sound after about 1 minute
Follow the bleeping sound and easily find your Model in Long Grass, Cornfields or even up a Tree

Operating Instructions

Connect the Lost Model Alarm between any servo and the receiver, (also acts as a mini servo extension)
First,turn on your Transmitter
Then turn on your receiver, you will hear two beep sounds
How to test it is functioning properly:
If you cannot find your Model, Simply turn off the Transmitter or do not move the control stick of the servo the LMA is connected to for 1 min, then you will hear a continuous beep sound.
If you ignore the continuous beep sound for around 2 minutes, the beep sound will change to a louder V sound.
By tracking the sound, you will be able to locate your RC plane / Helicopter
Can be connected to any kind of servo

Mr John Davies from East Yorkshire has reported that they do not work with all R/C Systems, He has tried them with SPEKTRUM 7010 & 7610 Receivers and they do not operate correctly in that they continue to bleep after One Minute has elapsed. This is normal as it acts as alarm when the receiver is left on without being used, and so preventing an RX being left on by mistake !

Product Options

Customer Reviews

There are currently no reviews for this product. Be the first to review by clicking below!

Review this product...

People who purchased this also purchased...