Please NOTE: This board is equal in performance to the KK Blackboard V5.5.
This is the latest Multicopter controller board V2 which supersedes the V1 TriCopter/Quadcopter controller V1 was a flight control board for 3 or 4 Rotor Aircraft (Trocopter / Quadcopters) and this NEW V2 will control upto six motors. Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega168PA IC. The Atmega168PA IC unit then processes these signals according the users installed software and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabalises your Quadcopter.
These control boards also use signals from your radio systems receiver (Rx) and passes these signals to the Atmega48PA IC via the ail (aileron), ele (elevator), thr (throttle) and rud (rudder) inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).
Based on the popular and already well supported KKMultiCopter Control board, . . . . . .
This control board uses Japanese Murata piezo gyros that are less sensitive to vibration than SMD type gyros and also features state of the art SMT manufacturing to ensure quality. This board also uses a user programmable Atmega168PA IC.
Size: 50.5mm x 50.5mm x 23.5mm Weight: 14.5 gram IC: Atmega168PA Gyro: Murata Piezo Input Voltage: 3.3-5.5V Signal from Receiver: 1520us (4 channels) Signal to ESC: 1520us (4 ESCs)
This NEW control Board will now support more than 4 motors (quadcopter) and will control up to 6 motors or see the KKMulticopter Board Here
There are currently no reviews for this product. Be the first to review by clicking below!